MVR Film Evaporator

Product Details:

Supply Ability : 50 Set Per Week
Share Your Product:

10000.00-500000.00 INR/Set

Get a Price/Quote

Request To Call Back Send Inquiry

Price And Quantity

Minimum Order Quantity 1 Set
Price 10000.00-500000.00 INR/Set

Trade Information

FOB Port shanghai
Supply Ability 50 Set Per Week
Delivery Time 90 Hours
Packaging Details carton steel
Certifications GMP

Product Description

Application:

Mechanical vapor recompression (MVR) evaporator used is used for milk, glucose, organic acid, VC, xylose, pharmaceutical, chemical, biological engineering, environmental industry, waste recycling industry, paper making industry, salt making industry and so on.

Structure Drawing:

Structure: MVR evaporator includes pre-heater, heater, pump, separator, vacuum system, compressor system, automatic control system, cleaning system and so on

Principle: To feed the material from raw material storage tank through feed pump, the preheating system and the heating system into the heater and the separator. To stop feeding when the liquid level reaches the setting height.

Then to start material circulating pump, the liquid will be circulating in the heater and the separator, to open the steam valve to heat the raw material, when the temperature is reaching the setting temperature, then turn on the vacuum system and compressor, the impeller speed is gradually increasing, then the system is evaporating, at the same time, the raw material is continuously entering from the bottom of the heater, it is like film flow from bottom to up, it is also heated by steam until boiling, the steam is spraying out from the arc guide groove to separator, the steam will be rotating rise along the wall of the separator and exhaust into compressor, the liquid will drop down to bottom of the separator. The temperature of pure steam will rise after compression, this recycled steam can heat the heater again, so it can save energy. The recycled steam will be cooled and became into hot water which flow into pre heater, to heat the raw material which flow into heater and separator, so the whole system maintained at a constant feed, discharge, evaporation.

Character:

MVR evaporator is new technology for modern industry

MVR Evaporator saving technology is the most advanced of the current international evaporator technology requires only a very small amount of Health and steam (when start up, need a small amount of steam, normal operation, is almost no need for the steam), greatly reduce business operating costs, reduce environmental pollution.
As a result of compressors to provide heat, and compared to conventional evaporator, the temperature difference is much smaller, to achieve a moderate evaporation, which greatly improve product quality and reduce fouling.
No condenser or only a small area condenser, structure and process is very simple, fully automatic, continuous operation, safe and reliable.
Equipment with CIP cleaning within the pipeline can be realized inside cleaning, the entire device easy to operate, no dead ends.
The evaporator is a material at low temperatures ( evaporation temperature 45-75 )and does not generate foam under the state of evaporation, liquid evenly, do not run material, not easy to coking, minimum denaturation for heatinf material

Parameter:

Model	MVR-0.5	MVR-1	MVR-1.5	MVR-2	MVR-5	MVR-10	MVR-15
Evaporation capacity	500kg/Hr	1000kg/Hr	1500kg/Hr	2000kg/Hr	5000kg/Hr	10000kg/Hr	15000kg/Hr
Inlet saturated steam capacity(kg/Hr)	500	1000	1500	2000	5000	10000	15000
Inlet saturation temperature (c)	55.295	71.631	82.109	90	90	90	90
Outlet temperature (c)	12.590	14.145	15.185	16.000	16.000	16.000	16.000
Outlet the saturation temperature (c)	67.885	85.776	97.294	106.000	106.000	106.000	106.000
Inlet saturation pressure kPa (A)	15.975	33.441	51.567	70.117	70.117	70.117	70.117
Inlet saturation pressure kPa (A)	28.432	59.596	91.921	125.029	125.029	125.029	125.029
Compression ratio	1.780	1.782	1.783	1.783	1.783	1.783	1.783
Motor power (kw)	40	55	75	95	132	550	640
Outlet volume flow (m^3/s)	0.795	0.7971	0.7985	0.7997	0.7997	0.7997	0.7997
exhaust velocity(m/s)	22.736	22.795	22.837	22.87	22.87	22.87	22.87
Outlet volume flow (m^3/s)	4X4X10	6X4.5X12	8X5.5X14	8X5.5X14	9.5X6X15	12.6X6.5X17	13.6X7X17